Carbon Monoxide + Carbon Dioxide + Methane 

(CO + CO2 + CH4) ANALYZER

Extractive multi Gauge

GasEye Extractive CO/CO2/CH4

Carbon Monoxide, CARBON DIOXIDE ANd Methane ANALYZER

GasEye CO/CO2/CH4 is a high performance carbon monoxide, carbon dioxide and methane analyzer. Suitable for safety applications and process control. 24/7 continuous operation. No sample preparation. No zero drift. No field calibration. Low cost of ownership.

Features

  • CO ranges: 0 – 1 ppmv
  • CO2 ranges: 0 – 5 ppmv
  • CH4 ranges: 0 – 10 ppmv
  • Process temperature: 0 – 100°C
  • Real time sensing: response time below 0.1 second
  • High sensitivity: detection limit from 0.01 ppmv / 0.05 ppmv / 0.1 ppmv
  • High selectivity: automatic compensation for interference effect from other constituents in the gas sample
  • Maintenance free: equipped with a self-calibrating feature, no field calibration necessary
  • Robustness: IP66 enclosure, suitable for outdoor and indoor installations and harsh environments
  • ATEX version available

Example Applications

  • Process control
  • Safety monitoring

Example Industries

  • Chemical industry
  • Food industry
  • Chemical industry

Application type

Analytical performance
Concentration measurement ranges CO/CO2/CH4: 0 – 1 ppmv / 0 – 5 ppmv / 0 – 10 ppmv
Detection limit (LOD) CO/CO2/CH4: 0.01 ppmv / 0.05 ppmv / 0.1 ppmv
Precision: LOD or 1% of the measured value, whichever is larger
Accuracy: LOD or 2% of the measured value, whichever is larger
Calibration: certified span gas
Zero drift and span drift: negligible
Measurement conditions
Process gas temperature: 0ºC to 200ºC (depends on application)
Process gas pressure: 0.05 – 0.35 barG
Dynamic performance
Warm-up time: approx. 20 minutes
Minimum response time (T90): 100 milliseconds
Climatic conditions
Ambient temperature: -30ºC to +60ºC
Ambient pressure: 800 – 1200 hPa
Ambient humidity: RH < 99%, non-condensing
Device Purging (if necessary)
Purging gas: instrument air or N2
Sensor purge flow rates: 0.2 – 7 l/min

Technical specification

Interfaces
Outputs: 4 x analog output 4 – 20 mA (gas concentration, process transmission, 2 x AUX) – easy user selection via DIP switch between active/passive mode
8 x digital output (NAMUR)
Inputs: 4 x analog input 4 – 20 mA (process temperature and pressure) – easy user selection via DIP switch between active/passive mode
1 x RTD (PT100/PT1000) - easy user selection via DIP switch between PT100/PT1000 and 2-/3-/4-wires
8 x digital input
Local User Interface: Human Machine Interface (HMI) - LCD backlight display located on the transmitter housing lid
Ethernet port:
a) WebServer – system configuration and data acquisition via web browser,
b) Windows based program – GasEye logger for real-time data acquisition,
c) remote service and diagnostics
Optional: Modbus (TCP/IP), Modbus RTU, Profinet, Profibus
Electrical Characteristics
Power input: 230 VAC nominal (100 – 240 VAC)
Power consumption: < 300VA (< 400VA if ATEX)
Additional build-in features
Automatic gain control (AGC): AGC ensures correct gas measurement even at high dust loads resulting in loss of optical transmission down to 0.5%. AGC operates fully automatic with no need for manual adjustment of the signal gain under any process conditions.
Self-calibration features: Internal reference gas compartment is used for closed loop control of the zero and span drift
Download a file:
GasEYE system elements: preview | download
Active analog input: preview | download
Active analog output: preview | download
Passive analog input: preview | download
Passive analog output: preview | download
Isolated Digital Input: preview | download
Isolated Digital Output: preview | download
PT100/PT1000 2-wire: preview | download
PT100/PT1000 3-wire: preview | download
PT100/PT1000 4-wire: preview | download

GasEye Extractive 19" RACK analyzer is assembled in a standard 19-inch rack 4U version.

It exists in several various configurations from single gas to multi gas applications. 

Specification:
Dimensions: width x height: 482 mm x 177 mm
length: 650 mm
Weight: 35 kg (for the model with multipass cell, vacuum pump, and safety valves)
Gas connection: 6 mm tubing
Materials:
Housing: aluminum
Internal process cell: stainless steel 316
Cell window: sapphire
Safety:
Low Voltage Directive (LVD) 2014/35/EU PN-EN 60825-1:2014-11 – Safety of laser products – Part 1: Equipment classification and requirements
PN-EN 61010-1:2011 – Safety requirements for electrical equipment for measurement, control and laboratory use – Part 1: General requirements
RoHS Directive 2011/65/EU  

GasEye Extractive Wall Mounted type analyzer exists in general purpose and hazardous area configuration (version Ex1). It exists in several various configurations from single gas to multi gas applications. The system is IP66 rated with ambient temperature ranges from -30ºC to +60ºC and can be mounted outside without a need for a container.

GasEye Extractive Ex1 provides Ex p (purge and pressurization) type of explosion protection. Ex p pressurized equipment is the technique of guarding against ingress of the external atmosphere into an enclosure by maintaining a protective gas therein at a pressure above that of the external atmosphere. The overpressure is maintained either with or without a continuous flow of the protective gas.

 

Specification:
Dimensions:

width x height: 460 mm x 230 mm
depth: 650 mm

Weight: 60 kg
Gas connection: connector 6 mm Swagelok
Materials:
Housing: SS 1.4301 (AISI 304)
Internal process cell: SS 1.4404 (AISI 316L)
Cell window: sapphire
Safety:
Low Voltage Directive (LVD) 2014/35/EU PN-EN 60825-1:2014-11 – Safety of laser products – Part 1: Equipment classification and requirements
PN-EN 61010-1:2011 – Safety requirements for electrical equipment for measurement, control and laboratory use – Part 1: General requirements
RoHS Directive 2011/65/EU
ATEX Directive 2014/34/EU EN IEC 60079-0:2018 - Explosive atmospheres - Part 0: Equipment - General requirements
EN 60079-2:2014 - Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure "p"
EN 60079-26:2015 - Explosive atmospheres - Part 26: Equipment with Equipment Protection Level (EPL) Ga
EN 60079-28:2015 - Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation

Explosion protection (standard version):

  • ATEX II 3G [Ex op is IIC T6 Gc]
  • ATEX II 3D [Ex op is IIIC T85°C Dc]

Explosion protection - ATEX Zone 1/21 (optional version):

GasEye Extractive Ex1: 

  • II 1/2G Ex op is pxb IIC T* Ga/Gb
  • II 1/2D Ex op is pxb IIIC T** Da/Db

GasEye Extractive Ex1 ET:

  • II 1/2G Ex db eb h ia ib op is pxb q IIC T* Ga/Gb
  • II 1/2D Ex h ia ib op is tb pxb q IIIC T** Da/Db

*/** temperature class depends on the medium temperature according to:

ID Medium temperature: Ambient conditions: Temperature class: Maximum surface temperature:
1 < 50°C -30°C to 50°C T6 85°C
2 < 100°C -30°C to 60°C T5 100°C
3 < 135°C -30°C to 60°C T4 135°C
4 < 200°C -30°C to 60°C T3 200°C

Certificate No. KDB 20ATEX0056X EN
Certificate No. KDB 20ATEX0056X PL

 

More information